DDmicro V0.2 coming soon

DDmicro V0.2 coming  soon

DDMicro has many attractive features.


• Bluetooth Low Energy 4.0 connection to up to 8 devices.
• USB Type C connection support
• Build-in Lithium-ion rechargeable battery
• Fully NKRO support(Max report keys are limited by USB protocol to 6)
• Standard Cherry MX switch footprint.
• Configurable individual RGB backlight(Optional)
• Up to 8 layers fully configurable key mapping
• Support split configuration of number keys with its symbols
• Multiple keyboard layouts
• Easy configuration tool
• Simple micro key stroke support(multiple modifier keys plus one character key)
DDMicro is designed with a compact 50% layout. It can provide the similar portability of a 40%
keyboard. But due to two extra columns of keys, its user experience is compatible to a 60% one.
DDMicro is designed to be flexible to use, light weight to carry, easy to configure, and effective
to type

Out Looking


DDMicro’s top side is fully covered by 4 x 14 keys, and surrounded by an ultra thin frame. On its
back side, there is a USB Type C connector, a power charging indicator, and a power switch,
located on the right.
The figure below shows the default layout with key definition. There are three reserved function
keys. They are configured to have special usage when the keyboard is powered on.
The first key on top row(Esc key in default definition) is Bluetooth Erase Band Key. Turn on
keyboard while holding this key can empty the paired device list and re-enable Bluetooth
advertising.
The second key on top row(‘q’ key in default definitions) is Bluetooth Add Band Key. Turn on
keyboard while holding this key can temporarily enable Bluetooth advertising for adding a new
device to paired list.
The third key on top row(‘w’ key in default definitions) is Configuration Mode Key. Turn on
keyboard while holding this key can switch keyboard into configuration mode. This mode is used
for re-flashing new key mapping definition

 

Battery


The default build-in battery is a 1100mAh Lithium-ion rechargeable battery. Extra large capacity
can be selected also. All default batteries have build-in safety protection IC. In daily usage,
DDMicro can be used for 3+ weeks with backlight turning off, or 100+ hours with backlight in
50% brightness.
When the battery voltage becomes too low, the keyboard will automatically switch off. Please
connect the Micro USB cable to charge the battery. Don’t forget to turn on the power switch
while charging, otherwise the battery will not be connected to power. The keyboard is designed
in dual modes. Connecting USB cable to your computer, the keyboard can be used in USB
mode while charging.
A red LED indicator close to the USB port can show the charging status.It will turn on while
charging, and switch off after the battery is full.

Keys Layout


Fully considered the customisation possibilities, DDMicro is designed to support multiple
layouts. You could select different mounting plate to setup your preferred layout. Some plate
may support multiple layout even. Here are some most popular layouts we recommended. And
more layout options will be released later

Bluetooth Pairing


Following the steps below to connect DDMicro to a host device.
1. Make sure the battery has not run out. Turn off power switch, and make sure that USB
cable is not plugged.
2. Hold on Bluetooth Erase Band Key( the most left key in top row ), or Bluetooth Add
Band Key( the second left key in top row ), and turn on power switch.
3. Turn on Bluetooth searching action on your host device (smartphone/Laptop/PC).
4. Wait for seconds and a device named as “DD Micro” will show up in the list. Select it to
connect.
5. If the device is not visible after 10 second, please re-do step 1-2, and check your
Bluetooth setup in host device.

Customize Your Key Definition

DDMicro supports up to eight independent key definitions on every key position. They are
organised based on the concept of “Function Layers”. A collection of definition for all keys
mapped to the same Function ID is called “one layer”, and can be enabled by
triggering(pressing) a defined function switch key. The key definitions for DDMicro can be single
key codes ( characters, symbols, function keys, etc ), but also simple micro key combinations (
modifier keys + a basic key, for example Ctrl + v ).
To customize your key definitions, you need to download DDMicro configuration application
called “DDConf” and run it on a Windows/Mac computer. It does not require installation nor any
other support driver. It is released as a Zip package. Uncompress it to any place, you will get
three files in the folder:
• dd_configuration.txt: key definition file. You could change key definitions by editing this
file in text editor, like Notepad. (UTF-8 encoding support is required)
• ddconf.exe: a Windows command line tool for downloading dd_configuration.txt content
to your DDMicro keyboard via USB port.
• ddconf: a MacOS command line tool for downloading dd_configuration.txt content to
your DDMicro keyboard via USB port.
The file dd_configuration.txt should be written in a specific structure, otherwise the configuration
tool cannot parse it correctly. This configuration file is case sensitive, which means ‘a’ and ‘A’
give different result. And this file is parsed based on each line. One line to present a case
description, or a set of key definitions for a keyboard row. Use whitespace or TAB mark to
separate description segments or the definition for each key position. Here a screenshot shows
the typical content of it

The first line is always tagged with “ENCODE”. It describes the keyboard language layout of this
configuration. Currently it supports “EN” (US standard layout) and “SV” (Swedish layout). This is
marked in red box in the screenshot.
The lines in blue box are backlight configuration. The backlight default mode (with tag
“BACKLIGHT_MODE_DEFAULT”) and backlight color (with tag “BACKLIGHT_COLOR”) can be
set separately. backlight color is only used in single color modes. With rainbow modes, the color
will enumerate all RGB colors. The default mode should be set to a mode ID within 1 ~ 9. It will
be set after the keyboard is powered on. The backlight color is set with a standard RGB color
code, 6-digit HEX number starts with a ‘#’ symbol.
The green box in the screenshot is layer declaration. They should start with tag “LAYER” and
followed by a number from 0 to 7. Layer 0 is default layer, which means after power on, or reset
layer, DDMicro will switch to this layer.
The lines marked in orange box are key definition lines. Each line refers to a row of keys on
DDMicro. Attention that in this file, all possible key positions should be explicitly defined. It might
be not mounted to a dedicated key on you layout setup, but you still have to define it in
dd_configuration.txt file. You could use the empty tag(…) as place holder for the empty
positions. This is because the firmware does not know which layout you have chosen, so you
have to always provide a complete setup. In each line of key definitions, the layer information is
not explicitly declared. This means the closest layer definition before will be inherited. And the
row number will be incremented by one on each new line.
For how to set the definition for each key position, please refer the “Tag list in configuration file”
chapter and “What’s more you should know” chapter

What’s More You Should Know


• Because the macro key definitions are supported, so the configuration file is case
sensitive. Which means the definition ‘a’ and ‘A’ will give different output. ‘a’ equals press key
‘a’ on ordinary keyboard. And ‘A’ equals press ‘Shift’ and ‘a’ at the same time.
• If you want to type micro key definition with modifier keys, use a character ‘+’ to combine
them. In micro definition, modifier keys should use their short names. You could combine one
or more modifier keys to one character/number/function/arrow key.
▪ Short names: C (Control), A(Alt), S(Shift), W(Win/Command)
▪ Example: ‘CR+RIGHT’ means press Control, Alt and right arrow keys at the
same time. Modifier keys’ sequence can be shuffled, this equals to ‘AC+RIGHT’.
• With the micro key definitions, you could define symbol keys individually. Which means
you could map number key ‘1’ with symbol key ‘!’ to different key positions. Firmware will help
you to press ‘Shift’ if needed.
• Because the keyboard typing mechanism applied for computer, the modifier key’s state
will be inherited until all keys are released. So please pay extra attention when typing micro
key definitions. We recommend to leave a clean time between typing micro keys and other
keys. You might saw some wrong characters send out while typing micro keys to fast.
▪ Example: When typing key definition ’!’, actually DD Micro send out key
combination with ‘1’ and a ‘Shift’ press. If you type ‘a’ before you release key ‘!’,
the ‘Shift’ key will be automatically inherited by your driver, then you will get an ‘A’
instead. So we strongly recommend you to slow down while using micro keys.

Download  DDMicro  User Guide